7mm to 5mm Gas Block Connector
The Gas Block connector provides a tube to tube joint and seal as well as providing a low-pressure gas seal between the inner microduct and the fibre bundle.
Gas blocks are suitably sized to match the tube diameters. When the fittings are pushed onto a clean-cuttube end, they make an airtight seal with internal O-rings. After installation of the fibre, the gas block seal is activated by turningthe nut clockwise.
If the tube is pulled away from the connector, internal teeth and a tapered body cause the tube to be gripped tighter. Removal of the tube is achievable by pressing the collet inwards.
The gas block connector is designed to be fitted at the point where the external network 7mm microducts connects to the internal network 5mm microduct and provides a seal between the installed fibre unit and the inner area of the microduct.
Supplied in a pack of 10.
The Gas Block connector provides a tube to tube joint and seal as well as providing a low-pressure gas seal between the inner microduct and the fibre bundle.
Gas blocks are suitably sized to match the tube diameters. When the fittings are pushed onto a clean-cuttube end, they make an airtight seal with internal O-rings. After installation of the fibre, the gas block seal is activated by turningthe nut clockwise.
If the tube is pulled away from the connector, internal teeth and a tapered body cause the tube to be gripped tighter. Removal of the tube is achievable by pressing the collet inwards.
The gas block connector is designed to be fitted at the point where the external network 7mm microducts connects to the internal network 5mm microduct and provides a seal between the installed fibre unit and the inner area of the microduct.
Supplied in a pack of 10.
| Yes |
To see our delivery charges, please click here
To see our terms regarding returns, please click here