Starrett Standard Holesaw Arbor

Starrett standard model arbors available in the following sizes:

Starrett A1 Arbor for 14-30mm Holesaws 11/32" Hex Shank

Suitable for use with holesaws sizes ranging from 14mm - 30mm diameter

Fitted with a 6.5mm/1/4 in pilot drill, with set screw in the arbor body allowing easy replacement of the pilot drill.

11/32" Hex Shank suitable to fit a 3/8" capacity chuck.

Also available with SDS + shank

Starrett A10 Arbor for 32-152mm Holesaws 11/32" Hex Shank

A10 arbor to suit 32-152mm holesaws. Fitted with a 6.5mm/1/4 in pilot drill, with a quick hitch mechanism that enables the user to instantly change holesaws without the use of tools and without removing the arbor from the chuck.

11/32" Hex Shank suitable to fit a 3/8" capacity chuck.

Starrett A2 Arbor for 32-210mm Holesaws 7/16" Hex Shank

The Starrett A2 Arbor is suitable for use with holesaw sizes ranging from 32mm - 210mm diameter. Fitted with a 6.5mm/1/4 in pilot drill, with set screw in the arbor body allowing easy replacement of the pilot drill.

Shank Size: 7/16in hex suitable to fit 1/2" capacity chuck.

Also available with SDS + shank

Mills Part Numbers

N76-1255 Starrett A1 Arbor for 14-30mm Holesaws 11/32" Hex Shank

N76-1149 Starrett A1-1 Arbor for 14-30mm Holesaws SDS Plus Shank

N76-1258 Starrett A10 Arbor for 32-152mm Holesaws 11/32" Hex Shank

N76-1260 Starrett A2 Arbor for 32-210mm Holesaws 7/16" Hex Shank

N76-1151 Starrett A2-1 Arbor for 32-210mm Holesaws SDS Plus Shank