HellermannTyton T50SOSEC12E Edge Fastening 1 to 3mm - Pack of 5000
Cable ties with EdgeClips are ideal where holes are not acceptable and there is no other way to route cables along an edge. This is often the case when connected module leads are too short to be fixed to substructures.
Another common scenario is keeping solar cables out of substructure metallic ducts or away from roof surfaces that can be flooded with water, causing inverter faults over time.
The EdgeClip can be easily pushed onto the edge by hand without any tools. The integrated metal clamp delivers reliably high extraction force.
Both cable tie and EdgeClip housing are manufactured of UV-stabilised PA6.6 specifically suitable for PV applications in temperate climate zones.
HellermannTyton’s Cable Tie with Edge Clip is designed to route bundles by securing them to the edge of a plastic or metal sheet without the need for a mounting hole.
The clip is easy to secure, and the extraction force is high due to the integrated metal clamp that holds the edge clip in place. This fastener is molded as a one-piece clip and tie combination.
Features
Easy assembly, just clip on by hand
For edges of 1 - 3 mm
Integrated metal clamp holds clip firmly in place
Clamp consists of double tempered steel spring
Ideal for applications where holes or adhesives are not suitable
ELV compliant Dir. Art. 4 (2) YES
Flammability UL 94 V2
Halogen free Yes
Hazardous good No
Operating Temperature - °C -40 °C to +85 °C, (+105 °C, 500 h)
Cable Tie 160 x 4.6mm
Max Bundle diameter 35mm
Supplied in a pack of 5000
HellermannTyton Art.-No. 126-00374 | T50SOSEC12E-PA66W-BK
Cable ties with EdgeClips are ideal where holes are not acceptable and there is no other way to route cables along an edge. This is often the case when connected module leads are too short to be fixed to substructures.
Another common scenario is keeping solar cables out of substructure metallic ducts or away from roof surfaces that can be flooded with water, causing inverter faults over time.
The EdgeClip can be easily pushed onto the edge by hand without any tools. The integrated metal clamp delivers reliably high extraction force.
Both cable tie and EdgeClip housing are manufactured of UV-stabilised PA6.6 specifically suitable for PV applications in temperate climate zones.
HellermannTyton’s Cable Tie with Edge Clip is designed to route bundles by securing them to the edge of a plastic or metal sheet without the need for a mounting hole.
The clip is easy to secure, and the extraction force is high due to the integrated metal clamp that holds the edge clip in place. This fastener is molded as a one-piece clip and tie combination.
Features
Easy assembly, just clip on by hand
For edges of 1 - 3 mm
Integrated metal clamp holds clip firmly in place
Clamp consists of double tempered steel spring
Ideal for applications where holes or adhesives are not suitable
ELV compliant Dir. Art. 4 (2) YES
Flammability UL 94 V2
Halogen free Yes
Hazardous good No
Operating Temperature - °C -40 °C to +85 °C, (+105 °C, 500 h)
Cable Tie 160 x 4.6mm
Max Bundle diameter 35mm
Supplied in a pack of 5000
HellermannTyton Art.-No. 126-00374 | T50SOSEC12E-PA66W-BK
| Yes |
To see our delivery charges, please click here
To see our terms regarding returns, please click here