Plugs Creosoted

Plugs Creosoted 10mm x 50mm (3/8” x 2”) available in packs of 100 or 1000.

These products are used to plug old fixing holes or test holes created following testing using a Mattson borer.

To prevent decay to the pole the specification LN435 states “All holes from cores taken for testing must be plugged with creosote treated plugs, which are an interference fit into any holes made.”

Hazard classifications for Creosote

H315 (90.91%): Causes skin irritation [Warning Skin corrosion/irritation]

H317 (90.91%): May cause an allergic skin reaction [Warning Sensitization, Skin]

H319 (90.91%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]

H350 (100%): May cause cancer [Danger Carcinogenicity]

H360 (90.91%): May damage fertility or the unborn child [Danger Reproductive toxicity]

H400 (90.91%): Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]

H410 (90.91%): Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard]

BT Openreach ref: 016266

Mills Part Numbers

S83-0944 Plug Creosoted 10 x 50mm - Pack of 100

S83-0644 Plug Creosoted 10 x 50mm - Pack of 1000