Mobra Mounting Brackets for Zero Expansion Fit (Pair)
Mobra Mounting Bracket for Zero Expansion Fit (Pair)
Used when the mobra bracket cannot be fixed normally using expansion due to distortion or potential damage to the chamber wall (i.e. composite/plastic section chambers without predefined mobra bracket fixing points (where Corner Mounting Brackets 100013669 (Mills S83-0527) would be used).
The zero expansion fit bracket can also be used in solid wall chambers. Fixings: Plastic/Composite – The Mobra Mounting Bracket should be affixed to composite/plastic chamber wall using 4 x M5 (No.10) x 75mm Pan Head Stainless Self-Tapping Screws (R02-0063) and fixed to concrete/brick chambers using 2 x M8 x 75mm Hex/Torx Head Concrete Screws (R02-0064).
Supplied in pairs.
Mobra Mounting Bracket for Zero Expansion Fit (Pair)
(VMO2 Use Only - Not PIA Approved)
Used when the mobra bracket cannot be fixed normally using expansion due to distortion or potential damage to the chamber wall (i.e. composite/plastic section chambers without predefined mobra bracket fixing points (where Corner Mounting Brackets 100013669 (Mills S83-0527) would be used).
The zero expansion fit bracket can also be used in solid wall chambers. Fixings: Plastic/Composite – The Mobra Mounting Bracket should be affixed to composite/plastic chamber wall using 4 x M5 (No.10) x 75mm Pan Head Stainless Self-Tapping Screws (R02-0063) and fixed to concrete/brick chambers using 2 x M8 x 75mm Hex/Torx Head Concrete Screws (R02-0064).
Supplied in pairs.
| Yes |
To see our delivery charges, please click here
To see our terms regarding returns, please click here
