Bosch GSR 18 V-EC FC2 FlexiClick Brushless Drill Driver Set

Product code
P09-5536
Read more

Bosch FlexiClick 5-in-1 System: Masters any challenge Integrated lockable bit holder accepts all common standard bits

Compact design – Short construction (147 mm) and low weight (1.7 kg, GSR 18 V-FC2) enable precise use

High efficiency – up to 826 screws (6 x 60 mm in softwood) with only one battery charge (18 V – 5.0 Ah)

Powerful – Exceptionally high torque due to newly developed gearbox design and new 4-pole Bosch high-performance motor Integrated LED light for illuminating the work area, even in dark places Innovative COOLPACK batteries ensure optimum heat dissipation and therefore increase lifetime by up to 100% (cf. Li-Ion batteries without COOLPACK)

Bosch Electronic Cell Protection (ECP): protects the battery against overload, overheating and deep discharge

Full flexibility – With its bit holder, drill chuck adapter, angle adapter, off-set angle adapter and rotary hammer adapter, the Bosch FlexiClick system provides the optimum solution in every work situation

Easy to operate – The Bosch FlexiClick adapters can be locked in 16 different positions (360°) without having to remove them from the cordless screwdriver

Versatile – The unique rotary hammer adapter turns the drill/driver into a fully fledged rotary hammer

Performance data

Torque, max. (hard/soft) 50 / 31 Nm
No-load speed (1st gear / 2nd gear) 0 – 500 / 0 – 1.700 rpm
Max. impact rate 4.800 bpm
Chuck capacity, min./max. 1,5 / 13 mm
Torque settings 18+1
Bit holder 1/4" internal hexagon

Battery and power

Battery voltage 18 V
Battery capacity 5,0 Ah
Cell type Lithium-ion

Drilling diameter

Max. drilling diameter in wood 38 mm
Max. drilling diameter in steel 13 mm

Screw diameter

Max. screw diameter 10 mm

Contents

  • 1x GSR 18 V-EC FC2 Drill Driver
  • 1x GFA 13mm Auto-Lock Chuck
  • 1x GWA Angle 13mm Auto-Lock Chuck
  • 1x GEA Off-Set Angle 1/4" Hex Chuck
  • 1x GHA SDS+ Plus Rotary Hammer Chuck
  • 1x Side Handle
  • 1x Depth Stop
  • 1x GAL 1880 CV Charger
  • 2x 5.0Ah Batteries
  • 1x L-Boxx Carry Case
  • 1x L-Boxx Inlay
  • 1x Belt Clip
  • 1x Bit Holder
  • 4x Colour Clips
Read more
In stock
£834.70 £695.58
1 ) PDF : Data Sheet

Bosch FlexiClick 5-in-1 System: Masters any challenge Integrated lockable bit holder accepts all common standard bits

Compact design – Short construction (147 mm) and low weight (1.7 kg, GSR 18 V-FC2) enable precise use

High efficiency – up to 826 screws (6 x 60 mm in softwood) with only one battery charge (18 V – 5.0 Ah)

Powerful – Exceptionally high torque due to newly developed gearbox design and new 4-pole Bosch high-performance motor Integrated LED light for illuminating the work area, even in dark places Innovative COOLPACK batteries ensure optimum heat dissipation and therefore increase lifetime by up to 100% (cf. Li-Ion batteries without COOLPACK)

Bosch Electronic Cell Protection (ECP): protects the battery against overload, overheating and deep discharge

Full flexibility – With its bit holder, drill chuck adapter, angle adapter, off-set angle adapter and rotary hammer adapter, the Bosch FlexiClick system provides the optimum solution in every work situation

Easy to operate – The Bosch FlexiClick adapters can be locked in 16 different positions (360°) without having to remove them from the cordless screwdriver

Versatile – The unique rotary hammer adapter turns the drill/driver into a fully fledged rotary hammer

Performance data

Torque, max. (hard/soft) 50 / 31 Nm
No-load speed (1st gear / 2nd gear) 0 – 500 / 0 – 1.700 rpm
Max. impact rate 4.800 bpm
Chuck capacity, min./max. 1,5 / 13 mm
Torque settings 18+1
Bit holder 1/4" internal hexagon

Battery and power

Battery voltage 18 V
Battery capacity 5,0 Ah
Cell type Lithium-ion

Drilling diameter

Max. drilling diameter in wood 38 mm
Max. drilling diameter in steel 13 mm

Screw diameter

Max. screw diameter 10 mm

Contents

  • 1x GSR 18 V-EC FC2 Drill Driver
  • 1x GFA 13mm Auto-Lock Chuck
  • 1x GWA Angle 13mm Auto-Lock Chuck
  • 1x GEA Off-Set Angle 1/4" Hex Chuck
  • 1x GHA SDS+ Plus Rotary Hammer Chuck
  • 1x Side Handle
  • 1x Depth Stop
  • 1x GAL 1880 CV Charger
  • 2x 5.0Ah Batteries
  • 1x L-Boxx Carry Case
  • 1x L-Boxx Inlay
  • 1x Belt Clip
  • 1x Bit Holder
  • 4x Colour Clips
Read more
More Information
Yes

To see our delivery charges, please click here

To see our terms regarding returns, please click here