Fibre Inspection Probe Kit

The FIP100 is a fully automated inspection tool that provides fast and reliable analysis of fibre optic connector end faces and bulkheads. With a single button press, the FIP100 automatically focuses, captures an image of the connector end face and provides a pass/fail result. The pass/fail status of the connector is instantly reported via a red/green LED on the probe. Detailed results are shown on the iOS or Android app, which provides PDF report generation and sharing. Both apps are pre-loaded with pass/fail requirements from IEC 61300-3-35, as required by all major telecommunications service providers.

Product Features

• Test ferrule end faces and bulkheads compliant to IEC61300-3-35
• Single-handed, one button operation
• Auto focus, auto capture, auto test
• LED pass/fail indicator on probe
• Small form factor enables inspection of difficult to reach ports
• Create and share reports on Android and iOS devices
• IEC, IPC and user defined inspection criteria
• Wide range of adapter tips

Applications

• Verify connector cleanliness before connecting
• Certify connector condition on installation
• Document connector damage when troubleshooting
• Inspection is essential for proper fibre handling in all networks

Pass/fail results in seconds: With the press of a single button, the FIP100 auto-focuses, captures, centers, and analyses the end[1]face image to industry standard IEC 61300-3-35, IPC-8497-1, AT&T TP-76461 and other user-defined criteria.

Untethered operation: One-button operation and pass/fail LED indicator enables operation without reference to the mobile app.

Wide range of adapter tips: Interchangeable adapter tips support fibre connector inspection for a wide range of patch cords and bulkhead-mounted connectors having either PC/UPC or APC polished end faces.

Operating features

• WiFi Characteristics IEEE 802.11bng 
• Focus Auto-focus (≤3 sec) and manual focus
• Centering Auto-centering (<1 sec)
• Button Functionality Power On/Off (>3 secs); Capture/Analysis/
• Auto-save/Live
• Main LED Functionality Blue = Connected to App, Green = Pass,
• Red = Fail
• Magnification b Variable from 80X to 700X, in Live and
• Capture modes
• Applications Compatibility Android ≥4.0.3, iOS ≥8.1
• Image Capture with Pass/Fail Analysis c IEC 61300-3-35, AT&T TP-76461, IPC[1]8497-1, user-set criteria
• Image File Format JPEG, GIF
• Image & Pass/Fail Results Storage c Yes
• File Storage Capacity c Unlimited
• Result Manager c Storage, rename, delete, transfer
• Reporting c Built-in fillable PDF reporter
• Supported Languages c English, French, German, Japanese,
• Korean, Russian, Spanish

Physical and power characteristics

• Battery Type Li-Ion, non-replaceable by user
• Maximum Charger Current Draw 1.2A, battery charge current + device
• consumption current
• Operating Time (typical) 60 hours d; 8 hours continuous
• Recharge Time ≤4 hours
• Low-Battery Warning Viewed on smart device
• Charging LED Status; viewed on smart device Red = Charging, Green = Fully Charged,
• Blinking Red/Green = Battery Fault
• Power Save Features (Controlled by App)
• Probe Auto-Off – disabled, 5, 10, 30, 60
• minutes; Probe WiFi Not Connected – 5 minutes
• AC Charger Voltage, Frequency, Current 100-240VAC, 50/60Hz, 5VDC, 2A
• Charger Jack 0.9 x 3.2 mm barrel, center (tip) positive
• Size (Max Diameter x Length) Ø 40 x 226 mm (Ø 1.6 x 8.9 in)
• Weight 150 g (5.3 oz)