Fusion Cat6 Feed Through RJ45 Modular Plugs PK10

Product code
T70-7698
Read more

Fusion Feed Through Modular Plugs are single-piece connectors making terminations faster and more consistent, and makes the process for working with CAT5e and CAT6 identical. The modular plugs enable the user to make a successful termination every time.

Installers no longer need to spend time accurately pre-trimming conductor wires to a specific length, simply removing an appropriate section of jacket and centre spline (if present), untwisting the pairs into the right order, and trimming the ends flat. The cable can then be inserted into the connector until seated.

As the wires are fed through the clear connector they are visible, enabling installers to easily verify the correct wiring order. This is far simpler than looking through the plug’s shell, as with a regular connector, providing greater accuracy and fewer errors.

Once the wires are inserted, the user can pull the cable into the plug until the cable jacket is fully secured under the strain relief tab.

Completing the process, the installer places the assembled plug into the E70-7697 Mills RJ45 Feed Through Crimp tool and squeezes the handle, closing the position, cleanly shearing the excess conductor wires and leaving a smooth finish thereby crimping and cutting in one easy action.

Supplied in a pack of 10

Read more
In stock
1 ) PDF : Data Sheet

Fusion Feed Through Modular Plugs are single-piece connectors making terminations faster and more consistent, and makes the process for working with CAT5e and CAT6 identical. The modular plugs enable the user to make a successful termination every time.

Installers no longer need to spend time accurately pre-trimming conductor wires to a specific length, simply removing an appropriate section of jacket and centre spline (if present), untwisting the pairs into the right order, and trimming the ends flat. The cable can then be inserted into the connector until seated.

As the wires are fed through the clear connector they are visible, enabling installers to easily verify the correct wiring order. This is far simpler than looking through the plug’s shell, as with a regular connector, providing greater accuracy and fewer errors.

Once the wires are inserted, the user can pull the cable into the plug until the cable jacket is fully secured under the strain relief tab.

Completing the process, the installer places the assembled plug into the E70-7697 Mills RJ45 Feed Through Crimp tool and squeezes the handle, closing the position, cleanly shearing the excess conductor wires and leaving a smooth finish thereby crimping and cutting in one easy action.

Supplied in a pack of 10

Read more
More Information
new
Yes