Prysmian CasaLink Block Terminal (CBT) Drop cables are of a single fibre design terminated at one end with an SC/APC connector.
This connector is housed in a shroud and has a pulling eye to support installation.
The terminated end is secured into the Casalink BlockTerminal (CBT), and the unterminated end is spliced at the customer premise.
In addition to pre-terminated CBT drop cables, a termination kit is also available that provides all the components for local termination.
Cable Description
This loose tube optical drop cable is designed for aerial and/or duct application and is suitable for use under 11kV power cables.
The cable has a break load of 1800N and a maximum aerial span length of 95M.
The table in the image shows the ice and wind loading for this cable.
***The cable also has Openreach PIA approval.
Design and Contruction
Optical fibre: Singlemode G.657.A1. Strength member: 3 x 0.32mm brass plated steel wires. Tube: Thermoplastic material filled with a suitable water tightness compound. Longitudinal Water Tightness: Water swellable elements (dry core only). Outer Sheath: HDPE, 2 Ripcords beneath the sheath. Grooves/stripes: Indicate planes for easy sheath removal
Layout: Single central tube Loose Tube Ø: 2.2mm Strength member: 3 x 0.32mm brass plated steel wires Sheath thickness: 1.6mm Cable Diameter: 6.0mm Cable Weight: 32kg / km Max installation tension: N 1200 Maximum breaking load: N 1800 Min. setting diameter: 120mm Temperature range °C: Installation -20 -> +60 Operation -20 -> +60
• Cabes are supplied on a wooden reel. • Single fibre terminated with an SC/APC adapter • Available in a range of lengths from 18M to 350M • A range of cable constructions can be used • To be used with the Casalink Block Terminal
Prysmian CasaLink Block Terminal (CBT) Drop cables are of a single fibre design terminated at one end with an SC/APC connector.
This connector is housed in a shroud and has a pulling eye to support installation.
The terminated end is secured into the Casalink BlockTerminal (CBT), and the unterminated end is spliced at the customer premise.
In addition to pre-terminated CBT drop cables, a termination kit is also available that provides all the components for local termination.
Cable Description
This loose tube optical drop cable is designed for aerial and/or duct application and is suitable for use under 11kV power cables.
The cable has a break load of 1800N and a maximum aerial span length of 95M.
The table in the image shows the ice and wind loading for this cable.
***The cable also has Openreach PIA approval.
Design and Contruction
Optical fibre: Singlemode G.657.A1. Strength member: 3 x 0.32mm brass plated steel wires. Tube: Thermoplastic material filled with a suitable water tightness compound. Longitudinal Water Tightness: Water swellable elements (dry core only). Outer Sheath: HDPE, 2 Ripcords beneath the sheath. Grooves/stripes: Indicate planes for easy sheath removal
Layout: Single central tube Loose Tube Ø: 2.2mm Strength member: 3 x 0.32mm brass plated steel wires Sheath thickness: 1.6mm Cable Diameter: 6.0mm Cable Weight: 32kg / km Max installation tension: N 1200 Maximum breaking load: N 1800 Min. setting diameter: 120mm Temperature range °C: Installation -20 -> +60 Operation -20 -> +60
• Cabes are supplied on a wooden reel. • Single fibre terminated with an SC/APC adapter • Available in a range of lengths from 18M to 350M • A range of cable constructions can be used • To be used with the Casalink Block Terminal