7 / 3.5mm Primary Tube Orange 500m

Product code
60085/500M
Read more

7mm OD polyethylene (PE) microduct (m/d) with low friction performance. This microduct will accept all blown fibre products that can be installed instead of the more traditional 5/3.5 microducts. 

Designed for direct burial in suitably prepared ground free from hard, heavy or sharp material.

Specification

Material Polyethylene HDPE

Outer diameter 7.0 ± 0.1 mm

Inner diameter 3.5 ± 0.1 mm

Mass, nominal 28 g/m

Min. bending radius of primary duct* 100 mm

Max. pull tension, single duct 390 N (39 kg)

Crush load (approx.) at 10 % compression 1800 N (180 kg)

Max. Blowing pressure 20 bar

Length 500 metres (0.5 kilometres)

*This radius relates to the microduct capability only and does not indicate a good radius for blowing FU.
1. These m/ds are compatible with designated 7 mm push-fit connectors.
2. Max air pressure for blowing: 20 bar.
3. Storage of unprotected primary microducts: Indoors and well shielded from daylight.

Please see datasheet for further details

Additional carriage charges may apply. Please contact sales for further information

Read more
In stock
£180.00 £150.00
1 ) PDF : Data Sheet

7mm OD polyethylene (PE) microduct (m/d) with low friction performance. This microduct will accept all blown fibre products that can be installed instead of the more traditional 5/3.5 microducts. 

Designed for direct burial in suitably prepared ground free from hard, heavy or sharp material.

Specification

Material Polyethylene HDPE

Outer diameter 7.0 ± 0.1 mm

Inner diameter 3.5 ± 0.1 mm

Mass, nominal 28 g/m

Min. bending radius of primary duct* 100 mm

Max. pull tension, single duct 390 N (39 kg)

Crush load (approx.) at 10 % compression 1800 N (180 kg)

Max. Blowing pressure 20 bar

Length 500 metres (0.5 kilometres)

*This radius relates to the microduct capability only and does not indicate a good radius for blowing FU.
1. These m/ds are compatible with designated 7 mm push-fit connectors.
2. Max air pressure for blowing: 20 bar.
3. Storage of unprotected primary microducts: Indoors and well shielded from daylight.

Please see datasheet for further details

Additional carriage charges may apply. Please contact sales for further information

Read more
More Information
Yes

To see our delivery charges, please click here

To see our terms regarding returns, please click here