Fluke Simplifiber Pro Singlemode 1310/1550 Laser Light Source

Product code
SFSINGLEMODE-SOURCE
Read more

Sturdily built and encased in a durable molding, the next generation Fluke Networks SimpliFiber Pro LED multimode and laser singlemode sources* retain the familiar intuitive four-button functionality from the popular workhorse SimpliFiber line, while incorporating additional features that make fiber testing even more simple. When combined with a SimpliFiber Pro optical power meter, these sources enable you to:

  • Quickly and efficiently measure power and loss at SC, LC, and ST connections using the dual-wavelength testing feature in which both 1310 and 1550 nm wavelengths can be transmitted simultaneously
  • Conveniently save measurements taken at both wavelengths into one record
  • Eliminate time-consuming mistakes with the automatic wavelength detection ability
  • Quickly identify patch panel cable routing without the assistance of a talk set and another technician

Emitter Type FP Laser: dual 1310 nm/1550 nm

Central Wavelength 1310 nm: +/- 20 nm 1550 nm: +/- 30 nm

Spectral Bandwidth (RMS) 1310 nm: 2 nm (maximum) 1550 nm: 3 nm (maximum)

Minimum Output Power 1310/1550 nm: ≥ -7 dBm (typical)

Power Output Stability ±0.25 dB over 8 hours

Auto Dual-Wavelength Switching Yes. Can be enabled or disabled by user.

Optical Connector Fixed SC2

Launch Condition 9/125 μm fiber

FindFiber Code Generation Yes. Fixed at ID 2.

Modes CW, 2 kHz modulated, Auto-wavelength

Power Requirement 2 AA Alkaline batteries.

Battery Life 30 hrs (typical)

Automatic Power Off 30 minutes (can be enabled or disabled by user)

Low Battery Warning LED blinks.

Size (L x W x H) 5.6 in x 3.2 in x 1.6 in (14.2 cm x 8.1 cm x 4.1cm)

Weight 9.8 oz (278 grams)

Read more
Out of stock
£2,527.04 £2,105.87

Sturdily built and encased in a durable molding, the next generation Fluke Networks SimpliFiber Pro LED multimode and laser singlemode sources* retain the familiar intuitive four-button functionality from the popular workhorse SimpliFiber line, while incorporating additional features that make fiber testing even more simple. When combined with a SimpliFiber Pro optical power meter, these sources enable you to:

  • Quickly and efficiently measure power and loss at SC, LC, and ST connections using the dual-wavelength testing feature in which both 1310 and 1550 nm wavelengths can be transmitted simultaneously
  • Conveniently save measurements taken at both wavelengths into one record
  • Eliminate time-consuming mistakes with the automatic wavelength detection ability
  • Quickly identify patch panel cable routing without the assistance of a talk set and another technician

Emitter Type FP Laser: dual 1310 nm/1550 nm

Central Wavelength 1310 nm: +/- 20 nm 1550 nm: +/- 30 nm

Spectral Bandwidth (RMS) 1310 nm: 2 nm (maximum) 1550 nm: 3 nm (maximum)

Minimum Output Power 1310/1550 nm: ≥ -7 dBm (typical)

Power Output Stability ±0.25 dB over 8 hours

Auto Dual-Wavelength Switching Yes. Can be enabled or disabled by user.

Optical Connector Fixed SC2

Launch Condition 9/125 μm fiber

FindFiber Code Generation Yes. Fixed at ID 2.

Modes CW, 2 kHz modulated, Auto-wavelength

Power Requirement 2 AA Alkaline batteries.

Battery Life 30 hrs (typical)

Automatic Power Off 30 minutes (can be enabled or disabled by user)

Low Battery Warning LED blinks.

Size (L x W x H) 5.6 in x 3.2 in x 1.6 in (14.2 cm x 8.1 cm x 4.1cm)

Weight 9.8 oz (278 grams)

Read more
More Information
Yes

To see our delivery charges, please click here

To see our terms regarding returns, please click here