Fluke Simplifiber Pro Singlemode 1310/1550 Laser Light Source
Sturdily built and encased in a durable molding, the next generation Fluke Networks SimpliFiber Pro LED multimode and laser singlemode sources* retain the familiar intuitive four-button functionality from the popular workhorse SimpliFiber line, while incorporating additional features that make fiber testing even more simple. When combined with a SimpliFiber Pro optical power meter, these sources enable you to:
- Quickly and efficiently measure power and loss at SC, LC, and ST connections using the dual-wavelength testing feature in which both 1310 and 1550 nm wavelengths can be transmitted simultaneously
- Conveniently save measurements taken at both wavelengths into one record
- Eliminate time-consuming mistakes with the automatic wavelength detection ability
- Quickly identify patch panel cable routing without the assistance of a talk set and another technician
Emitter Type FP Laser: dual 1310 nm/1550 nm
Central Wavelength 1310 nm: +/- 20 nm 1550 nm: +/- 30 nm
Spectral Bandwidth (RMS) 1310 nm: 2 nm (maximum) 1550 nm: 3 nm (maximum)
Minimum Output Power 1310/1550 nm: ≥ -7 dBm (typical)
Power Output Stability ±0.25 dB over 8 hours
Auto Dual-Wavelength Switching Yes. Can be enabled or disabled by user.
Optical Connector Fixed SC2
Launch Condition 9/125 μm fiber
FindFiber Code Generation Yes. Fixed at ID 2.
Modes CW, 2 kHz modulated, Auto-wavelength
Power Requirement 2 AA Alkaline batteries.
Battery Life 30 hrs (typical)
Automatic Power Off 30 minutes (can be enabled or disabled by user)
Low Battery Warning LED blinks.
Size (L x W x H) 5.6 in x 3.2 in x 1.6 in (14.2 cm x 8.1 cm x 4.1cm)
Weight 9.8 oz (278 grams)
Sturdily built and encased in a durable molding, the next generation Fluke Networks SimpliFiber Pro LED multimode and laser singlemode sources* retain the familiar intuitive four-button functionality from the popular workhorse SimpliFiber line, while incorporating additional features that make fiber testing even more simple. When combined with a SimpliFiber Pro optical power meter, these sources enable you to:
- Quickly and efficiently measure power and loss at SC, LC, and ST connections using the dual-wavelength testing feature in which both 1310 and 1550 nm wavelengths can be transmitted simultaneously
- Conveniently save measurements taken at both wavelengths into one record
- Eliminate time-consuming mistakes with the automatic wavelength detection ability
- Quickly identify patch panel cable routing without the assistance of a talk set and another technician
Emitter Type FP Laser: dual 1310 nm/1550 nm
Central Wavelength 1310 nm: +/- 20 nm 1550 nm: +/- 30 nm
Spectral Bandwidth (RMS) 1310 nm: 2 nm (maximum) 1550 nm: 3 nm (maximum)
Minimum Output Power 1310/1550 nm: ≥ -7 dBm (typical)
Power Output Stability ±0.25 dB over 8 hours
Auto Dual-Wavelength Switching Yes. Can be enabled or disabled by user.
Optical Connector Fixed SC2
Launch Condition 9/125 μm fiber
FindFiber Code Generation Yes. Fixed at ID 2.
Modes CW, 2 kHz modulated, Auto-wavelength
Power Requirement 2 AA Alkaline batteries.
Battery Life 30 hrs (typical)
Automatic Power Off 30 minutes (can be enabled or disabled by user)
Low Battery Warning LED blinks.
Size (L x W x H) 5.6 in x 3.2 in x 1.6 in (14.2 cm x 8.1 cm x 4.1cm)
Weight 9.8 oz (278 grams)
Yes |
To see our delivery charges, please click here
To see our terms regarding returns, please click here